Janka Test, Jank-a Hard! ASTM D1037 Janka Testing
Are you wondering how to perform the Janka wood flooring hardness test per ASTM D1037? Look no further, engineers! You’ve come to the right place. We’ll break down the steps for you and explain why it is important for your project.
What Is The Janka Wood Flooring Hardness Test?
The Janka wood flooring hardness test is a test used to measure the relative hardness of different species of wood. This is done by pressing a steel ball with a specific diameter into the surface of a piece of wood until an indentation is made. The force required to cause this indentation is then measured and used to calculate an overall score. This score can then be used to compare different species of wood and determine which one is more resilient against wear and tear over time.
Performing The Test
To perform the test, you will need a steel sphere with a diameter of 0.444 inches (11.28 mm). Place it on the surface of your sample with its center aligned over one side edge. Apply pressure at a rate of 1 lb/sec until half of the sphere has been embedded in the sample . Record the maximum load required before embedment occurs as well as any other information that may be relevant for your project.
It should also be noted that these tests should always be performed on finished samples in order to get accurate results because unfinished samples tend to give inaccurate readings due to their soft nature. In addition, multiple samples should always be tested and averaged together in order to get accurate results as well.
In conclusion, we hope this blog post provided you with some insight into performing the Janka Wood Flooring Hardness Test according to ASTM D1037 standards! By following these steps, you will have all the information necessary to make informed decisions about which species of wood would work best for your flooring project. So don’t wait any longer – go out there and jank-a hard!
Frank Bacon Machinery has over 250 tensile testers both new, used, and remanufactured in stock. Email or call us today and we will get you sized into the right machine to meet your needs.