Test System Accessories

Hydraulic Actuators (27)
Hydraulic Power Supplies (HPU) (22)
Miscellaneous Accessories and Testing Equipment (16)
MTS Hydraulic Service Manifolds (1)
Tensile Testing Grips (16)
Test System Controllers (2)
22KIP (100kN) MTS 318.10 Fatigue Load Frame

EQUIPPED WITH:
- Hydraulic Crosshead Lifts and Hydraulic Locks
- MTS 22 KIP 3,000 PSI 6″ Stroke Actuator, Model 318.10 L/F, S/N 10219813A with LVDT & Area = 7.57 in^2
- MTS Service Manifold with two MTS Piston Accumulators and On/Off Solenoid Valve
- (2) 10 GPM MTS/Moog 252.24G-04 Servo Valves with MTS Port Shut-Off Valves
- 22KIP (100 kN) MTS Model 661.20E-03 Fatigue Rated Load Cell
#13131-01 | Click for quote
20GPM MTS 505.20 Hydraulic Power Supply

Model: 505.20

Serial Number: 10214615

Assembly Number: 100-017-877 Rev A

Flow (GPM): 20.0 (75.5 l/min)

MFG Date: 06/2006

Pressure (PSI): 3,000

Motor: 40 HP

Hours: (0) After Pump Rebuild

Voltage Requirements (V, Hz, Ph, A): 460, 60, 3, 53.1

Cooling: Water Cooled Heat Exchanger

#12954-00 | Click for quote
11GPM MTS 505.11 Hydraulic Power Unit

Model: 505.11

Serial Number: 10200169

Assembly Number: 100-150-897 Rev A

Flow (GPM): 11.0 (41.6 l/min)

MFG Date: 11/2005

Pressure (PSI): 3,000

Motor: 25 HP

Hours: 0 (Fully Rebuilt with New Pump)

Voltage Requirements (V, Hz, Ph, A): 208, 60, 3, 80.7

(Input Voltage can be Changed Per Request)

#12771- 02 | Click for quote
20GPM MTS 505.20 Hydraulic Power Supply

Model: 505.20

Serial Number: 10221576

Assembly Number: 100-009-559 Rev A

Flow (GPM): 20.0 (75.5 l/min)

MFG Date: 09/2006

Pressure (PSI): 3,000

Motor: 40 HP

Voltage Requirements (V, Hz, Ph, A): 440-460, 60, 3, 53.1

Cooling: Water Cooled Heat Exchanger

#13131- 03 | Click for quote
Video Extensometer

EQUIPPED WITH:
- Universal Rugged Carrying Case
- Software USB with Software Dongle
- Power Cable and Communication Cable
- Any Gauge Length Between 2 mm and 100 mm
- Universal Base Mounting for Universal Testing Machine of Choice
Video Extensometer | Click for quote
6.4 GPM MTS 506.02 Hydraulic Power Supply

Model: 506.02D

Serial Number: 0126725

Flow (GPM): 6.4 (24.3 l/min)

Pressure (PSI): 3,000

MFG Date: 10/91

Hours: (0) After New Pump Installed

Control Voltage: 24VDC

Motor (HP/RPM): 15/1755

Voltage Requirements (V, Hz, Ph, A): 460, 60, 3, 21.6

Cooling: Water Cooled Heat Exchanger

(Air-Cooled Heat Exchanger Available for Additional $2,000)

#13068-01 | Click for quote
22KIP (100kN) Instron Hydraulic Actuator

Equipped With:

• 100kN Instron Tension & Compression Fatigue Rated Load Cell

• Manifold for up to Two Servo Valves (Valves Available for Additional)

• Moog Model 760-724A Servo Valve

• Rear Swivel Joint

• Accumulator and High Pressure Filter

13114-01 | Click for quote
1000 kN Shimadzu Model EHF-JB1000kN Hydraulic Test Actuator

Equipped With:
- Internal LVDT
- Shimadzu 1000kN Tension & Compression Load Cell Model SFL-1000kN S/N: 86230
#13114-02 | Click for quote
Tensilkut 10-68 Flat Specimen Preparation Machine

Motor Size: 1.5 HP

Electrical Requirements: 115V/1PH/8 amp

13069-02 | Click for quote
3.1 GPM MTS 506.01D Air-Cooled Hydraulic Power Supply

Model: 506.01D
Serial Number: 539
Assembly No: 380801-10
Flow (GPM): 3.1 (11.7 l/min)
Pressure (PSI): 3000
Motor (HP/RPM): 7.5/1725
Hours: 4650
Voltage Requirements (V, Hz, Ph, A): 460, 60, 3, 10
Cooling: New AKG Model AR30-3 Air-Coole Heat Exchanger with PID Controlled Fan Controller

#13115-00 | Click for quote
10kN Eccentric Roller Grips

Rated 10 kN (2200 lb)
Max Sample Thickness: 8 mm (0.32″)
Knurled surface roller 50 mm (1″) diameter
Smooth surface back plate
15.9mm female cup adapter with a hole for a 8mm dia. cross pin Max sample width 60 mm (2.4″)
Set of (2) Machine Adapters

#G-10kNECCENTRIC | Click for quote
5kN Eccentric Roller Grips
(1) Set of (2) Eccentric Roller Grips

Rated 5 kN (1125 lb)

Max Sample Thickness: 7 mm (0.27″)

Knurled roller 30 mm diameter

Smooth back plate

15.9mm female cup adapter with a hole for a 8mm dia. cross pin

Max sample width 50 mm (2″)

Set of (2) Machine Adapters
#G-5kNECCENTRIC | Click for quote
150GPM MTS 505.150 Hydraulic Power Unit

Model: 505.150
Serial Number: 1387111
Flow (GPM): 150 (567 l/min)
MFG Date: 12/2002
Pressure (PSI): 3,000 (207 Bar)
Motor: 60 HP (5 Total)
Hours: Sold with New Pumps Installed
Voltage Requirements (V, Hz, Ph, A): 460, 60, 3, 388 Cooling: Water Cooled Heat Exchanger (32 GPM at 70 F) Heat Load Maximum: 765,000 BUT/hr
Dimensions: 168″L x 39″W x 79″H
Weight: Empty 7305 lbs / Max Fluid 10,977 lbs
Noise Level: 71 dB(A) at 1M

#13033-00 | Click for quote
180GPM MTS 505.180 Hydraulic Power Unit

Model: 505.180
Serial Number: 10236754
Assembly Number: 100-177-015
Flow (GPM): 180 (681 l/min)
MFG Date: 6/2007
Pressure (PSI): 3,000 (207 Bar)
Motor: 60 HP (6 Total)
Voltage Requirements (V, Hz, Ph, A): 460, 60, 3, 466 Cooling: Water Cooled Heat Exchanger (32 GPM at 70 F) Heat Load Maximum: 918,000 BUT/hr
Dimensions: 168″L x 39″W x 79″H
Weight: Empty 8,226 lbs / Max Fluid 11,898 lbs
Noise Level: 72 dB(A) at 1M

#13107-00 | Click for quote
ASTM C633 Test Fixture for Thermal Spray Coatings

Fixture for Adhesion Testing of Thermal Spray Coatings ASTM C633 Made Per ASTM C633 Requirements Self-Aligning Design Upper and Lower 50kN (11,250 lbf) Grip Holder Upper and Lower Tensile Grip M16 Threaded Inserts Upper and Lower 25mm Diameter Stainless Steel Cylinder (M16 Male Thread) Upper and Lower Male to Male Adaptors for Load Frame of […]

#FB-C633 | Click for quote
20K in-lb (2,260 N-m) MTS 215.42 Hydraulic Rotary Actuator

Equipped With:
• MOOG Servo Valve Model 73-104, S/N 1850
• MTS 12,500 in-lb Capacity Fatigue Rated Axial-Torque Sensor, Model 662.02B-03 S/N 136
• Rotary Encoder
• Flexural Adaptor Mount

13062-01 | Click for quote