-
Hydraulic Actuators (30)
-
Hydraulic Power Supplies (HPU) (21)
-
Miscellaneous Accessories and Testing Equipment (16)
-
MTS Hydraulic Service Manifolds (1)
-
Tensile Testing Grips (17)
-
Test System Controllers (3)
-
22KIP (100kN) MTS 647.10 Hydraulic Grips
EQUIPPED WITH:-
Set of (4) Flat Wedge
#13175-01 | Click for quote
-
-
5.5KIP MTS 204.52 Hydraulic Actuator
EQUIPPED WITH:
-
2 Port Manifold
#12788-03 | Click for quote
-
-
110KIP (500kN) MTS 204.81 Hydraulic Actuator
EQUIPPED WITH:
-
-
MTS Swivel Base
-
MTS Rod End Swivel
-
110KIP (500kN) MTS Model 661.23A-02 Load Cell
-
Dual MOOG Model 76-264 Servo Valves
-
#13189-00 | Click for quote
-
-
11KIP (50 kN) MTS 244.21 Hydraulic Actuator
EQUIPPED WITH:
-
Two (2) MTS/Moog Model 252.24C-01 10 GPM Servo Valves
#13198-00 | Click for quote
-
-
3.3KIP MTS 204.51 Hydraulic Actuator
EQUIPPED WITH:
-
Internal LVDT
Note: MTS/MOOG Servo Valves Available in 1-15 GPM Flow Rates for Additional Cost#13188-03 | Click for quote
-
-
MTS 493.02 FlexTest SE Controller
EQUIPPED WITH:-
-
MTS 498.96-1B Processor Board Providing PIDF Processing and an Interface between the Controller & PC
-
MTS 493.42 Single Station System Board Providing Analog & Digital I/O, E-Stop, HSM, UPS & HPS Control
-
MTS 493.40 I/O Carrier Board with (3) 493.25B DUC Cards & (1) 493.14B Valve Driver
-
Analog Input & Output
-
#12780-06 | Click for quote
-
-
MTS 493.02 FlexTest SE Controller
EQUIPPED WITH:-
MTS 498.96-1B Processor Board Providing PIDF Processing and an Interface between the Controller & PC
-
MTS 493.42 Single Station System Board Providing Analog & Digital I/O, E-Stop, HSM, UPS & HPS Control
-
MTS 493.40 I/O Carrier Board with (3) 493.25B DUC Cards & (1) 493.14B Valve Driver
-
Analog Input & Output
#12780-05 | Click for quote
-
-
New Combined Loading Compression (CLC) Test Fixture ASTM 6641
Includes:-
Built Per ASTM D6641 Standard
-
2 Pairs of Steel blocks, with Each Pair Bolted Together
-
Specimen Fits into a Slot in the Blocks to Prevent Buckling
-
Accommodates Samples 5.5″ long x 0.5″ wide x up to 0.5″ thick
-
Linear Bearing Rods to Keep the Blocks Aligned
-
Circular Recess Provides Clearance for Extensometer, if Necessary
-
Constructed of Nickel Coated Steel per ASTM D6641
-
Fixture is Used Between Compression Platens (Sold Separately)
#G-FB-D6641 | Click for quote
-
-
5.5KIP MTS 244.12 Hydraulic Actuator
EQUIPPED WITH:
-
15GPM MTS/MOOG Servo Valve
-
MTS Swivel Base
-
MTS Rod End Swivel
#12969-14 | Click for quote
-
-
11GPM MTS 515.11 Hydraulic Power Unit
Model: 515.11Serial Number: 105241222Assembly Number: 100-343-689 Rev AFlow (GPM): 11 (41.6 l/min)MFG Date: 11/7/2016Pressure (PSI): 3,000Motor: 60 HP (3 Total)Hours: 25.9 Hours (Like New Condition)Voltage Requirements (V, Hz, Ph, A): 480, 60, 3, 35.1Cooling: Water Cooled Heat ExchangerWeight With Oil: 1,330 lbs#13173-02 | Click for quote
-
22KIP (100kN) MTS 318.10 Fatigue Load Frame
EQUIPPED WITH:
-
Hydraulic Crosshead Lifts and Hydraulic Locks
-
MTS 22 KIP 3,000 PSI 6″ Stroke Actuator, Model 318.10 L/F, S/N 10219813A with LVDT & Area = 7.57 in^2
-
MTS Service Manifold with two MTS Piston Accumulators and On/Off Solenoid Valve
-
(2) 10 GPM MTS/Moog 252.24G-04 Servo Valves with MTS Port Shut-Off Valves
-
22KIP (100 kN) MTS Model 661.20E-03 Fatigue Rated Load Cell
#13131-01 | Click for quote
-
-
20GPM MTS 505.20 Hydraulic Power Supply
Model: 505.20Serial Number: 10214615Assembly Number: 100-017-877 Rev AFlow (GPM): 20.0 (75.5 l/min)MFG Date: 06/2006Pressure (PSI): 3,000Motor: 40 HPHours: (0) After Pump RebuildVoltage Requirements (V, Hz, Ph, A): 460, 60, 3, 53.1Cooling: Water Cooled Heat Exchanger#12954-00 | Click for quote
-
11GPM MTS 505.11 Hydraulic Power Unit
Model: 505.11Serial Number: 10200169Assembly Number: 100-150-897 Rev AFlow (GPM): 11.0 (41.6 l/min)MFG Date: 11/2005Pressure (PSI): 3,000Motor: 25 HPHours: 0 (Fully Rebuilt with New Pump)Voltage Requirements (V, Hz, Ph, A): 208, 60, 3, 80.7(Input Voltage can be Changed Per Request)#12771- 02 | Click for quote
-
20GPM MTS 505.20 Hydraulic Power Supply
Model: 505.20
Serial Number: 10221576
Assembly Number: 100-009-559 Rev A
Flow (GPM): 20.0 (75.5 l/min)
MFG Date: 09/2006
Pressure (PSI): 3,000
Motor: 40 HP
Voltage Requirements (V, Hz, Ph, A): 440-460, 60, 3, 53.1
Cooling: Water Cooled Heat Exchanger
#13131- 03 | Click for quote
-
Video Extensometer
EQUIPPED WITH:-
Universal Rugged Carrying Case
-
Software USB with Software Dongle
-
Power Cable and Communication Cable
-
Any Gauge Length Between 2 mm and 100 mm
-
Universal Base Mounting for Universal Testing Machine of Choice
Video Extensometer | Click for quote
-
-
6.4 GPM MTS 506.02 Hydraulic Power Supply
Model: 506.02D
Serial Number: 0126725
Flow (GPM): 6.4 (24.3 l/min)
Pressure (PSI): 3,000
MFG Date: 10/91
Hours: (0) After New Pump Installed
Control Voltage: 24VDC
Motor (HP/RPM): 15/1755
Voltage Requirements (V, Hz, Ph, A): 460, 60, 3, 21.6
Cooling: Water Cooled Heat Exchanger
(Air-Cooled Heat Exchanger Available for Additional $2,000)
#13068-01 | Click for quote
![logo](http://frankbacon.com/wp-content/themes/frankbacon/images/logo.png)
Frank Bacon
1-800-394-4280
Request a Quote
Machinery Sales Company
Turnkey new, used and reconditioned
testing equipment provider.
testing equipment provider.